Oct
25

Yes – we are still working hard on the new Core Knowledge Simulation. Here are some more you will see in the new product. Enjoy!

3.20 Implement IPv6 Neighbor Discovery

What protocol is used in conjunction with solicited-node multicast addresses in order to facilitate IPv6 Neighbor Discovery?

3.50 Implement OSPF version 3

What protocol is used to support authentication in OSPF version 3?

6.02 Implement Zone Based Firewall

What are the three possible actions you specify for traffic in your policy-map in a Zone-Based Firewall configuration?

10.05 Implement Simple Network Management Protocol (SNMP)

What is the default encryption used in SNMP version 3?


You can leave a response, or trackback from your own site.

2 Responses to “New CCIE R/S Core Knowledge Questions Part 4”

 
  1. 3.20 Implement IPv6 Neighbor Discovery

    What protocol is used in conjunction with solicited-node multicast addresses in order to facilitate IPv6 Neighbor Discovery?

    ICMP

    http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html#wp1282543

    3.50 Implement OSPF version 3

    What protocol is used to support authentication in OSPF version 3?

    IPSec

    http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ospf.html#wp1069880

    6.02 Implement Zone Based Firewall

    What are the three possible actions you specify for traffic in your policy-map in a Zone-Based Firewall configuration?

    Inspect, Drop, or Pass

    http://blog.internetworkexpert.com/2009/08/15/ccie-rs-4-x-zone-based-firewall-tier-1/

    10.05 Implement Simple Network Management Protocol (SNMP)

    What is the default encryption used in SNMP version 3?

    DES

    http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_snmp_sup_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1010901

  2. Mbong says:

    This is cool stuff. I have gone through the first 407 over 10 times. Hopefully, I can add more to what I have.

 

Leave a Reply

Categories

CCIE Bloggers