May
10

I offered one iPad Mini but in the end I’m giving three iPad Mini’s away. The first one to the person who answered it first as stated in my original blog post. The second one to the first person to answer it and explain why point-to-multipoint resolved it which is also worthy of an iPad Mini. Finally a third to a very detailed answer that is just too good not to give an iPad Mini for. Next time we’ll do the first answer and the best answer.

Here are the winner’s answers in order listed above:



Jessica Odlow contact the winners on Monday to get their shipping address and iPad Mini’s shipped out.

About Brian Dennis, CCIE #2210:

Brian Dennis has been in the networking industry for more than 22 years, with a focus on Cisco networking for the past 16 years. Brian achieved his first CCIE in Routing & Switching in 1996, and is currently the only ten year CCIE that holds five CCIE certifications. Prior to working with INE, Brian taught and developed CCIE preparation courses for various well known training organizations. Brian not only brings his years of teaching experience to the classroom, but also years of real world enterprise and service provider experience.

Find all posts by Brian Dennis, CCIE #2210 | Visit Website


You can leave a response, or trackback from your own site.

3 Responses to “Three iPad Mini Winners for the OSPF Virtual Link Problem”

 
  1. Manouchehr says:

    oh man, this holiday cost me a mini ipad… lol…. Next Time!!!

  2. JDH says:

    Brian – I built a lab in GNS3 to demonstrate this issue and the P2MP solution. However, I cannot get the VL to come up unless the cost for EACH physical interfaces at both ends of the VL is less than 65535. My understanding was that if one interface had a cost of 65535, the VL would be up on one side and down on the other until the network type was changed to P2MP, at which point, the VL would come up fully.
    I have two routers connected via a frame-relay switch. Auto-cost reference is 10000. I’m using the bandwidth command on the serial interfaces connecting to the frame-relay switch. One side is set to 256 and the other to 128.
    Thoughts?

  3. Paul says:

    My IPAD arrived a while back and it had been great. I’m currently sunk into this game “World of Goo”. I must say, what a distraction from CCIE studying!

 

Leave a Reply

Categories

CCIE Bloggers