Archive for December, 2014
Foundation Lab 2 has now been added to the CCIE RSv5 Workbook. This lab is great for working on your configuration speed and accuracy when combining multiple technologies together. It also has a great redistribution section that I hope you’ll all enjoy More Full Scale, Troubleshooting, and Foundation labs are in progress and will be posted soon. I’ll post another update about them when they are available.
In addition to this we’ve added some feature enhancements to the workbook in response to customer requests and feedback. First, there is a new Table of Contents for the workbook that allows you to view all tasks, and to check off tasks that you’ve already completed. This will help you track your progress as you’re going through the workbook.
You can additionally check off the progress of a task in the upper right hand portion of the individual lab page.
Multiple bookmarks are now supported, and will be added to a section under the Table of Contents. When you open the workbook it will now also prompt you to load your latest bookmark.
Lastly, configuration solutions are now hidden by default when you open a lab. This will help prevent “spoilers” in the config before you’ve had a chance to attempt the lab. To see the solution configs, click the Expand button as seen below.
If you want to hide the configuration solution again you can click to collapse.
We’re always looking for additional ways to improve our products, so if you have any suggestions you can submit feedback through the workbook labs themselves, post on our Online Community, or feel free to send me an email directly at email@example.com.
After long anticipation, Cisco’s Virtual Internet Routing Lab (VIRL) is now publicly available. VIRL is a network design and simulation environment that includes a GNS3-like frontend GUI to visually build network topologies, and an OpenStack based backend which includes IOSv, IOS XRv, NX-OSv, & CSR1000v software images that run on the built-in hypervisor. In this post I’m going to outline how you can use VIRL to prepare for the CCIE Routing & Switching Version 5.0 Lab Exam in conjunction with INE’s CCIE RSv5 Advanced Technologies Labs.
The first step of course is to get a copy of VIRL. VIRL is currently available for purchase from virl.cisco.com in two forms, a “Personal Edition” for a $200 annual license, and an “Academic Version” for an $80 annual license. Functionally these two versions are the same. Next is to install VIRL on a hypervisor of your choosing, such as VMWare ESXi, Fusion, or Player. Make sure to follow the installation guides in the VIRL documentation, because the install is not a very straightforward process. When installing it on VMWare Player I ran into a problem with the NTPd not syncing, which resulted in the license key not being able to register. In my case I had to edit the /etc/ntp.conf file manually to specify a new NTP server, which isn’t listed as a step in the current install guide. If you run into problems during install check the VIRL support community, as it’s likely that someone has already run into your particular install issue, and a workaround may be listed there.
Once VIRL and VM Maestro (the GUI frontend) is up and running, the next step is to build your topology. For the INE CCIE RSv5 Advanced Technology Labs, this topology will be 10 IOS or IOS XE instances that are connected to a single vSwitch. All you need to do to build this is to add the 10 IOS instances, and then connect them all to a single “Multipoint Connection”. Logical network segments will then later be built based on the initial configurations that you load on the routers for a specific lab. The end result of the topology should look something like this:
You may also want to add some basic customization to the topology file and the VM Maestro interface. I set the hostnames of the devices to R1 – R10 by clicking on the router icon, then setting the “Name” under the Properties tab.
Next under the File > Preferences > Terminal > Cisco Terminal you can set the options to use your own terminal software instead of the built in one. In my case I set the “Title format” variable to “%s”, which makes it show just the hostname in the SecureCRT tab, and set the “Telnet command” to “C:\Program Files\VanDyke Software\SecureCRT\SecureCRT.exe /T /N %t /TELNET %h %p”, which makes it spawn a SecureCRT tabbed window when I want to open the CLI to the routers. Your options of course may vary depending on your terminal software and its install location.
Next, click the “Launch Simulation” button on the topology to start the routers. Assuming everything is correct with your install, and you have enough CPU & memory resources, the instances should boot and show the “ACTIVE” state, similar to what you see below:
If you right click on the device name you’ll see the option to telnet to the console port. Note that the port number changes every time you restart the simulation, so I found it easier just to launch the telnet sessions from here instead of creating manual sessions under the SecureCRT database.
You should now be able to connect to the consoles of the routers and see them boot, such as you see below:
R1 con0 is now available Press RETURN to get started. ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * ************************************************************************** R1> R1>enable R1#show version Cisco IOS Software, IOSv Software (VIOS-ADVENTERPRISEK9-M), Experimental Version 15.4(20141119:013030) [jsfeng-V154_3_M 107] Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Tue 18-Nov-14 20:30 by jsfeng ROM: Bootstrap program is IOSv R1 uptime is 46 minutes System returned to ROM by reload System image file is "flash0:/vios-adventerprisek9-m" Last reload reason: Unknown reason This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to firstname.lastname@example.org. Cisco IOSv (revision 1.0) with with 484729K/37888K bytes of memory. Processor board ID 9B2DD0A36JBLXZY7SLJTF 2 Gigabit Ethernet interfaces DRAM configuration is 72 bits wide with parity disabled. 256K bytes of non-volatile configuration memory. 2097152K bytes of ATA System CompactFlash 0 (Read/Write) 0K bytes of ATA CompactFlash 1 (Read/Write) 0K bytes of ATA CompactFlash 2 (Read/Write) 1008K bytes of ATA CompactFlash 3 (Read/Write) Configuration register is 0x0 R1#
With this basic topology you should have the 10 IOSv instances connected on their Gig0/1 interface to the same segment. The Gig0/0 interface is used for scripting inside the VIRL application, and can be shutdown for our purposes. The end result after the images boot should be something similar to this:
R1#show cdp neighbor Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone, D - Remote, C - CVTA, M - Two-port Mac Relay Device ID Local Intrfce Holdtme Capability Platform Port ID R9.openstacklocal Gig 0/1 177 R B IOSv Gig 0/1 R8.openstacklocal Gig 0/1 167 R B IOSv Gig 0/1 R3.openstacklocal Gig 0/1 155 R B IOSv Gig 0/1 R2.openstacklocal Gig 0/1 177 R B IOSv Gig 0/1 R7.openstacklocal Gig 0/1 156 R B IOSv Gig 0/1 R6.openstacklocal Gig 0/1 146 R B IOSv Gig 0/1 R5.openstacklocal Gig 0/1 129 R B IOSv Gig 0/1 R4.openstacklocal Gig 0/1 153 R B IOSv Gig 0/1 R10.openstacklocal Gig 0/1 146 R B IOSv Gig 0/1 Total cdp entries displayed : 9
Next you can load your initial configs for the lab you want to work on, and you’re up and running! I’ve taken the liberty of converting the CSR1000v formatted initial configs for our Advanced Technologies Labs to the IOSv format, as the two platforms use different interface numbering. Click here to download these initial configs as well as the .virl topology file that I created.
For further discussions on this see the IEOC thread Building INE’s RSv5 topology on VIRL.