Posts Tagged ‘lab cram’
INE CCIE RSv5 Lab Cram Session is now available for viewing in our All Access Pass Library. This course includes over 35 hours of new content for CCIE Routing & Switching Version 5, including both technology review sessions as well as a step-by-step walkthrough of two new CCIE RSv5 Mock Lab Exams. These new Mock Labs are available here as part of INE’s CCIE RSv5 Workbook.
This class is designed as a last minute review of technologies and strategy before taking the actual CCIE RSv5 Lab Exam. Each of the two Mock Labs covered in class are subdivided into three sections – just like the actual exam – Troubleshooting, Diagnostics, and Configuration.
Rack rentals are available for these mock labs here. Technical discussion of the labs is through our Online Community, IEOC.
Edit: Thanks for playing! You can find the official answer and explanation here.
I had an interesting question come across my desk today which involved a very common area of confusion in OSPF routing logic, and now I’m posing this question to you as a challenge!
The first person to answer correctly will get free attendance to our upcoming CCIE Routing & Switching Lab Cram Session, which runs the week of June 1st 2015, as well as a free copy of the class in download format after it is complete. The question is as follows:
Given the below topology, where R4 mutually redistributes between EIGRP and OSPF, which path(s) will R1 choose to reach the network 126.96.36.199/32, and why?
- What will R2′s path selection to 188.8.131.52/32 be, and why?
- What will R3′s path selection to 184.108.40.206/32 be, and why?
- Assume R3′s link to R1 is lost. Does this affect R1′s path selection to 220.127.116.11/32? If so, how?
Tomorrow I’ll be post topology and config files for CSR1000v, VIRL, GNS3, etc. so you can try this out yourself, but first answer the question without seeing the result and see if your expected result matches the actual result!
Good luck everyone!