Posts Tagged ‘Nexus 1000v’
Last week we quietly snuck into the All Access Pass the recordings of the live UC on UCS and Nexus 1000v on UCS classes that I ran just a few weeks back. If you have never run Unified Communications in a virtual environment or have never worked with a distributed virtual switch in a VMware environment, these classes will certainly aid you in preparing for that first deployment. If you have worked with either product for a little while, these classes will deepen your understanding of what’s needed and what’s really going on behind the scenes. The Nexus 1000v class is also very useful for the Unified Communications engineer, as most deployments these days are virtual machines, and the Nexus 1000v is the recommended L2 switch to run them on, since the UCS can only match/mark at L2 CoS, whereas the Nexus 1000v allows you to match the L3 DSCP that the UC servers are natively sending and map them to a L2 CoS value, which is currently the only value seen and honored by any of your UCS or Nexus switches in your modern data centers.
I will be furthering this series with classes on the VSG with VNMC, the ASA 1000v, and later with the InterCloud 1000v as well as possibly more virtual devices in the weeks to come.
The third and final portion of our CCIE Data Center Live Online Bootcamps – Unified Computing with Nexus 1000v – is now complete, and the videos are available for both streaming and download. This class focuses on the Cisco Unified Computing System – both B-Series and C-Series servers, Fabric Interconnects, and also the Nexus 1000v. We use the Nexus 5548UP switches along with Cisco MDS 9222i and a rack of JBODs to configure absolutely everything live in the class, including boot-from-SAN, FC zoning, static and dynamic pinning, normal and vPC port-channels, FCoE and vPC-HM (Host Mode) with MAC-Pinning. We also discuss many of the very recent enhancements to the Cisco UCS line with the new addition of version 2.1 and UCS Central.
All Access Pass (AAP) subscribers can view the videos in streaming format for no additional fee and also purchase the download version at a discounted rate. If you are not an AAP subscriber you can purchase the standalone download version here. As usual, all of these videos have cross-platform support (desktop, iPhone/iPad, Android, Windows phone, etc.), and the download versions are DRM free. After you purchase them, they are yours to do with as you please.
A few samples of the class, along with the outline can be seen after the break.
While delivering what turned out to be a very successful UCS and Nexus 1000V class a week and a half back, a number of you on the east coast of the US got tragically knocked out of class due to Hurricane/TS Sandy. While the class had to go on, I received a number of emails later on the following week mentioning about the disappointment many of you had based on not being able to ask questions during the live class. So we’ve decided to run the class again, live, the week after next. So for any who were not able to attend the first time due to this or any other reason, or would just like to attend again (or simply have an opportunity to purchase it for the first time and still attend a live version of this class), we will offer it again beginning on Nov 26 and running through Nov 30.
For anyone who may not know INE’s teaching style very well – let me just tell you that you will not be bored to death-by-powerpoint. We’ll present a very few slides with key points to remember, but 90% of the content you will see will be live, hands-on configuration and troubleshooting. We test everything the box(es) have to offer. We’ll do static pinning, dynamic pinning, and port channels for both LAN and SAN, and verify and fail(over) everything to show exactly what’s going on. We don’t just do GUI (that’d be too boring). We verify everything in the NX-OS CLI, and the upstream Nexus 5548UPs and MDS 9222Is. We’ll boot from local disk, boot from SAN, and build ESXi 5 live on the blades and pizza-box C200 as well, while talking through a number of the recommendations from both Cisco and VMware on the box. Things like number of vNICs, vHBAs, when to enable failover or not to enable failover and on which vNICS – and when should you do these things on ESXi with standard vSwitches vs when you should do them on ESXi running on top of the N1Kv VEM module.
Also, watch this blog as we will soon announce dates for a few new classes I will be holding relating to some very real-world production network training. Things such as UC on UCS (actually building it – not just talking about it), as well as BYOD with Cisco ISE across Wireless, Nexus and Catalyst platforms, as well as an across-the-board QoS class that shows both relevant and similar comparison configurations spanning Catalyst 3550, 3560/3750, 6500 with many various model blades, and Nexus 5500, 7000 and even 1000 platforms. The QoS class is something I’ve been asked by students to do for a while now, and am quite excited to bring all the hardware together in a single class.
See you in about a week.