Posts Tagged ‘sip normalization’
Many businesses globally – large and small alike – have been converting calls from routing over traditional PSTN carrier trunks – such as E1 & T1 PRI or CAS – to much lower cost, yet still high performance, SIP ITSP (Internet Telephony Service Provider) trunks for years now. INE is no different than your business with regard to this – we have been using SIP trunks in lieu some traditional PSTN calling for years now as well. In fact, in response to a US Federal Communications Commission sub-commitee’s exploration on “PSTN Evolution” in December 2009, a representative from the US carrier AT&T described the traditional circuit-switched PSTN as “relics of a by-gone era”, and said that “Due to technological advances, changes in consumer preference, and market forces, the question is when, not if, POTS service and the PSTN over which it is provided will become obsolete” – source: Reuters [emphasis mine].
The challenge however, becomes that every SIP ITSP carrier has a slightly different way of implementing these sorts of trunks, and each has different provider network equipment that you, the customer, must connect to, and interoperate (properly) with. If you are a large national or multinational business, you may for instance sometimes even connect to two or three different types of provider network equipment, between possibly having multiple contracts with multiple carriers, and even sometimes having to deal with different provider equipment within a single carrier’s network.