Posts Tagged ‘vPath’
While delivering what turned out to be a very successful UCS and Nexus 1000V class a week and a half back, a number of you on the east coast of the US got tragically knocked out of class due to Hurricane/TS Sandy. While the class had to go on, I received a number of emails later on the following week mentioning about the disappointment many of you had based on not being able to ask questions during the live class. So we’ve decided to run the class again, live, the week after next. So for any who were not able to attend the first time due to this or any other reason, or would just like to attend again (or simply have an opportunity to purchase it for the first time and still attend a live version of this class), we will offer it again beginning on Nov 26 and running through Nov 30.
For anyone who may not know INE’s teaching style very well – let me just tell you that you will not be bored to death-by-powerpoint. We’ll present a very few slides with key points to remember, but 90% of the content you will see will be live, hands-on configuration and troubleshooting. We test everything the box(es) have to offer. We’ll do static pinning, dynamic pinning, and port channels for both LAN and SAN, and verify and fail(over) everything to show exactly what’s going on. We don’t just do GUI (that’d be too boring). We verify everything in the NX-OS CLI, and the upstream Nexus 5548UPs and MDS 9222Is. We’ll boot from local disk, boot from SAN, and build ESXi 5 live on the blades and pizza-box C200 as well, while talking through a number of the recommendations from both Cisco and VMware on the box. Things like number of vNICs, vHBAs, when to enable failover or not to enable failover and on which vNICS – and when should you do these things on ESXi with standard vSwitches vs when you should do them on ESXi running on top of the N1Kv VEM module.
Also, watch this blog as we will soon announce dates for a few new classes I will be holding relating to some very real-world production network training. Things such as UC on UCS (actually building it – not just talking about it), as well as BYOD with Cisco ISE across Wireless, Nexus and Catalyst platforms, as well as an across-the-board QoS class that shows both relevant and similar comparison configurations spanning Catalyst 3550, 3560/3750, 6500 with many various model blades, and Nexus 5500, 7000 and even 1000 platforms. The QoS class is something I’ve been asked by students to do for a while now, and am quite excited to bring all the hardware together in a single class.
See you in about a week.